How to Bethlehem Christmas. If you are looking for a Christmas craft to do with children, today we bring you a fantastic idea. What do you think make a Bethlehem Christmas with the kids? We have seen in other posts how to make a Christmas tree with buttons and create original Christmas trees with different materials. Now it is the turn to Bethlehem Christmas ... you urge to build a Bethlehem Christmas with popsicle sticks? It's easy! What I liked about this Christmas craft is that the whole family can work together to create a Bethlehem Christmas special, where everyone has contributed their bit.
Materials Required
For the stable:
1 pack of craft sticks (ice cream)
scissors and wire cutters
glue gun
brown paint
1 small package of moss
art black wire
wood star
yellow paint (or gold) and gray (or cream)
sandpaper
sponge
For figures of Bethlehem:
Two clay pots of 4.5cm or 5cm
Two wooden balls 3.5cm
1 wooden ball 1cm
scraps of fabric
permanent black pen
1 small wooden block
moss
flesh colored paint, blue and black
glue gun
small needle
jute
brush
wire cutter
How do the stable of Bethlehem Christmas
First, Cut 2 sticks using the wire cutters in half and then, using the same procedure, four sticks Cut into quarters. Once ready cuts, you are ready to Put to work.
Colocad two sets of four poles and Tack on the top and bottom halves with glue sticks as shown in Figure 2. Then, a set of 9 Ferro sticks and stick Tack integer in the top and one at the bottom.
To continue, X Tack on two sticks at the top of the set of 9 sticks. Let dry thoroughly and then grab all three pieces and two smaller Paste the walls forming the stable (photo 4). The roof is made with two sets of 7 sticks each secured with glue and folded two sticks at the top and bottom of each set. Note that the sticks crossed on top must be in the sticks standing limit order to form the peak of the roof (see pictures 5 and 6). Tack both sets at the top at the desired angle to the ceiling and let dry thoroughly.
Utilize the sponge (or cloth) to paint the base of Bethlehem and ceiling. To give it a worn effect, you can grab a little cream or gray paint with a rag and rub gently on each side painted. Let dry thoroughly before proceeding. With the glue gun, Tack base Bethlehem Christmas and ceiling as shown in Figure 9. Agregad then the moss on the roof top, securing with glue. The final touch is the star, pintadla of gold or yellow and let dry. Pass the black wire on the roof of Bethlehem and the Star Tack on the cable end.
Step by step, the Christmas crib figures
Cut 2 sticks for four parts of 5cm (keeping the final round) and 3 sticks for six parts of 4.5cm (discarding the final round). With the 4 sticks rounded Form up two crosses as shown in Figure 2 and pegadlas with glue. To create the cradle, Tack 4 sticks of 4.5 cm and two edges to form (Fig. 3). Then Paste the two crosses at the bottom, being careful that they are even so that the cradle can stand by itself. Tack Graffiti brown and moss inside. Graffiti wood ball 1 cm skin color, and then let dry pegadla on top of a wooden block. With the black pen, Graffiti face and using fine needle, Graffiti little white dots to form the pupil and cheeks. Envolved to Christ in a piece of cloth and put it on the cradle.
0 comments:
Post a Comment